Shin Nippon UTO REF-KERATOREFRACTMETER Accuref 8001
SKU:
$2,981.00
$2,981.00
per item
Description:
Compact,Elegant Design,Light Weight & Easy Operation
Wide Measurement Range of Sph －25.00D to 25.00D, Cyl －10.00D to 10.00D.
2.3 mm Minimum Pupil Diameter & 3 steps Target Light Adjuster
Allows you to measure much smaller pupils than conventional units and 3 steps Target Light Adjuster ensures accurate results.
Clear 5.6 inch LCD color monitor
LCD color monitor produces superb colorful display of the icons for easier identification to select your desired choices for measurement.
Data Screen Function
Measured data can be seen on the monitor without printing.3 steps Monitor angle
Monitor angle can be tilted in 3 steps that allows comfortable operation for both stand-ing and sitting positions.Choices on printout format
Format of the print out, ALL, ECONO and OFF, can be set on the mode selection.
Quick Printer with Automatic Cutter Printing paper is automatically cut when it completes printing.Auto Start Function
Auto Start Function allows measuring automatically when alignment meets measurement requirements.Quick Measurement Function
Quick Measurement Function realizes 1-10 times continuous measurements by pushing the measurement button once.Measurement Function
ACCURF 8001 has the function to measure the IOL (intraocular lens) implanted eye.RC-232C Setting Function
With this function, you can send the measurement data to an external computer through an interface.
The data is sent using ASCII CODE.Output Terminal
This terminal outputs an NTSC video terminal. If you connect an external monitor, you can observe the same image that appears on the internal monitor screen of ACCUREF 8001 simulataneously.
Power Saving Function
The switchover time can be selected on the menu screen.
Spectification:
Specifications
Refractive Measuring Range Sph:－25～ 25D (0.12/0.25D step)
Cy:0～±10D (0.12/0.25D step)
Axis:1～180° (1°step)
Vertex Distance 0, 10, 12, 13.5, 15 mm
Minimum Pupil Diameter φ2.3 mm
PD Measurement Measurement range:85 mm (1 mm step)
Printer Thermal line printer with automatic cutter (paper width 57 mm)
Internal Monitor 5.6 inch LCD monitor (color)
Shifting Range for Sliding Body back/forth ±17 mm
right/left ±43 mm
up/down ±17 mm
Vertical Adj.Range for Chin Rest ±30 mm
Dimensions (W) 240 mm (D) 418 mm (H) 438 mm
Weight approx. 15 kg
Date Output RS－232C interface Video Terminal
Power Source 100～240V 50 / 60Hz
Consumption 80 VA
Power Saving Function OFF, 3, 5, 10 min. (switchable)
Standard Accessories Model Eye, Power Code, Printing Paper, Fuse, Chin Rest Paper, Chin Rest Paper Pin, Dust Cover.
Compact,Elegant Design,Light Weight & Easy Operation
Wide Measurement Range of Sph －25.00D to 25.00D, Cyl －10.00D to 10.00D.
2.3 mm Minimum Pupil Diameter & 3 steps Target Light Adjuster
Allows you to measure much smaller pupils than conventional units and 3 steps Target Light Adjuster ensures accurate results.
Clear 5.6 inch LCD color monitor
LCD color monitor produces superb colorful display of the icons for easier identification to select your desired choices for measurement.
Data Screen Function
Measured data can be seen on the monitor without printing.3 steps Monitor angle
Monitor angle can be tilted in 3 steps that allows comfortable operation for both stand-ing and sitting positions.Choices on printout format
Format of the print out, ALL, ECONO and OFF, can be set on the mode selection.
Quick Printer with Automatic Cutter Printing paper is automatically cut when it completes printing.Auto Start Function
Auto Start Function allows measuring automatically when alignment meets measurement requirements.Quick Measurement Function
Quick Measurement Function realizes 1-10 times continuous measurements by pushing the measurement button once.Measurement Function
ACCURF 8001 has the function to measure the IOL (intraocular lens) implanted eye.RC-232C Setting Function
With this function, you can send the measurement data to an external computer through an interface.
The data is sent using ASCII CODE.Output Terminal
This terminal outputs an NTSC video terminal. If you connect an external monitor, you can observe the same image that appears on the internal monitor screen of ACCUREF 8001 simulataneously.
Power Saving Function
The switchover time can be selected on the menu screen.
Spectification:
Specifications
Refractive Measuring Range Sph:－25～ 25D (0.12/0.25D step)
Cy:0～±10D (0.12/0.25D step)
Axis:1～180° (1°step)
Vertex Distance 0, 10, 12, 13.5, 15 mm
Minimum Pupil Diameter φ2.3 mm
PD Measurement Measurement range:85 mm (1 mm step)
Printer Thermal line printer with automatic cutter (paper width 57 mm)
Internal Monitor 5.6 inch LCD monitor (color)
Shifting Range for Sliding Body back/forth ±17 mm
right/left ±43 mm
up/down ±17 mm
Vertical Adj.Range for Chin Rest ±30 mm
Dimensions (W) 240 mm (D) 418 mm (H) 438 mm
Weight approx. 15 kg
Date Output RS－232C interface Video Terminal
Power Source 100～240V 50 / 60Hz
Consumption 80 VA
Power Saving Function OFF, 3, 5, 10 min. (switchable)
Standard Accessories Model Eye, Power Code, Printing Paper, Fuse, Chin Rest Paper, Chin Rest Paper Pin, Dust Cover.
