- Featured Products
- >
- OLYMPUS AU 600 Chemistry Analyzer
OLYMPUS AU 600 Chemistry Analyzer
SKU:
$21,891.00
$21,891.00
Unavailable
per item
Quality New Systems at Significant
Savings
- Installation and onsite Operator Training
- Warranty – 12 months parts, labor & travel
- Technical Support
- Onsite Response – 24 to 48 hour
- Options – 24/7 and Business Hours
Analytical system Fully automated, for routine, STAT, urine, Fluid samples
Analytical methods
Clinical chemistry and immunological parameters. End point, kinetic assays, fixed-time-kinetics, optionally ISE
Simultaneously processed analytes
48 photometric tests, 51 with ISE
Throughput
800 photometric tests/hour; maximum of 1200 with ISE
Sample feeder
Racks with 10 samples each (bar codes on primary tubes and on racks); capacity of 150 samples; continuous loading
Sample tubes
In primary and secondary tubes; diameter between 11.5 and 16.5 mm; height between 55 and 102 mm
STAT samples
Up to 18 positions for STAT sampleswith bar codes
Sample volume
2 – 50 µl in 1 µl steps (1 – 50 µl for repeats)
Reagent supply
refrigerated (4 °C - 12 °C); 48 positions for R1/R2
Reagent volume
1. reagent: 25 – 300 µl; 2. reagent: 25 – 300 µl; (in 1 µl steps)
Total reaction volume
152 – 550 µl
Reaction cuvette
Quartz cuvettes
Reaction time
Up to 8 minutes, 15 seconds
Reaction temperature
37 °C
Mixing method
With rotating paddles after dispensing sample and reagent
Photometry system
Direct assay through the reaction cuvette (0 – 2.5 OD) mono, bichromatic measurements possible
Wavelength
13 different wave lengths between 340 – 800 nm
Cuvette cleaning
Comprehensive cleaning with detergents
Calibration
linear and non linear (linear interpolation)
Data processing
calculated parameters, blank value correction and correlation. Definition of normal
value range, measuring range, pathological values and repeats. Quality controls,
printout of abnormal values, pending sample work list and repeat run sample list
Savings
- Installation and onsite Operator Training
- Warranty – 12 months parts, labor & travel
- Technical Support
- Onsite Response – 24 to 48 hour
- Options – 24/7 and Business Hours
Analytical system Fully automated, for routine, STAT, urine, Fluid samples
Analytical methods
Clinical chemistry and immunological parameters. End point, kinetic assays, fixed-time-kinetics, optionally ISE
Simultaneously processed analytes
48 photometric tests, 51 with ISE
Throughput
800 photometric tests/hour; maximum of 1200 with ISE
Sample feeder
Racks with 10 samples each (bar codes on primary tubes and on racks); capacity of 150 samples; continuous loading
Sample tubes
In primary and secondary tubes; diameter between 11.5 and 16.5 mm; height between 55 and 102 mm
STAT samples
Up to 18 positions for STAT sampleswith bar codes
Sample volume
2 – 50 µl in 1 µl steps (1 – 50 µl for repeats)
Reagent supply
refrigerated (4 °C - 12 °C); 48 positions for R1/R2
Reagent volume
1. reagent: 25 – 300 µl; 2. reagent: 25 – 300 µl; (in 1 µl steps)
Total reaction volume
152 – 550 µl
Reaction cuvette
Quartz cuvettes
Reaction time
Up to 8 minutes, 15 seconds
Reaction temperature
37 °C
Mixing method
With rotating paddles after dispensing sample and reagent
Photometry system
Direct assay through the reaction cuvette (0 – 2.5 OD) mono, bichromatic measurements possible
Wavelength
13 different wave lengths between 340 – 800 nm
Cuvette cleaning
Comprehensive cleaning with detergents
Calibration
linear and non linear (linear interpolation)
Data processing
calculated parameters, blank value correction and correlation. Definition of normal
value range, measuring range, pathological values and repeats. Quality controls,
printout of abnormal values, pending sample work list and repeat run sample list