Konica Minolta Drypro 832
SKU:
$8,790.00
$8,790.00
Time to first print, a major speed and productivity parameter, has been greatly improved to a short 50 seconds, dramatically enhancing productivity and workflow.
The Drypro 832 was first released in 2007, at which time it featured the world's fastest printing time.
Five film sizes and two trays
Five film sizes are available (14×17", 14×14", 11×14", 10×12", and 8×10") optionally, by installing an additional film supply tray, two film sizes can be used at the same time, for example, 14×17" and 11×14", or 14×17" and 8×10"
User-friendly
The DRYPRO 832 is very user friendly. It is easy to use, warms up quickly, and is very quiet. A clearly visible status light changes colour to indicate “Ready”, “Printing”, and “Film Empty” conditions.
User-friendly.
Stable operation with no HDD
Hard drives store system software and data and, with that, there is always a risk that the disc will crash, bringing operation to a standstill. With the DRYPRO 832, we have eliminated the hard drive and introduced a design where the essential system software is run from compact flash memory and image data is managed by an external computer (CS-2/3 or Printlink5-IN), thereby contributing to stable operation.
Networking by Printlink
With its flexible networking capability, the Printlink print management system provides the ideal output solution in a variety of environments, enabling output from multiple Regius consoles (CS-2/3) and printing from DICOM modalities. By using Printlink IV/ID(sold separately), you can also connect to non-DICOM modalities.
Specifications Drypro model 832
Laser source Semiconductor laser
Film size 14”×17” (35×43cm), 14”×14” (35×35cm), 11”×14” (28×35cm), 10”×12” (25×30cm) and 8”×10” (20×25cm) selectable
Film Dry imaging recording film SD-Q / SD-QC
Image format 1,2,4,6,8,9,12,15,16,20,24,25,30,35,36,42,48,54,60,63,64
Image memory Print memory (65MB / standard)
Pixel size 78.6µm (320dpi)
Image data input 8-bit / 12-bit
Output gradation 16384 levels (14-bits)
Image mode Pixel replication / Function interpolation process
Processing capability More than 90 sheets/hour
First printing time Less than 50 seconds
Input interface Ethernet 10base-T/100base-TX/1000base-T
External connection Connection to external computer (CS-2/3 or Printlink5-IN)
Supply 1 Tray (standard) 2 Tray maximum (optional)
Border processing Black/White
Trimmed frame Available
Density correction Automatic via built-in densitometer
Positive/negative Available
Operating condition 15-30℃ (59-86F) 30-70% RH
Power UL:120V AC±10% 60Hz±１Hz 10A
CE:220-240V AC±10% 50-60Hz± 1Hz 6A
Heat generation UL:1200KJ/H or less
CE:1400KJ/H or less
Noise level In print Mode:53 dB or less
In standby mode:46 dB or less
Dimensions W599×D585×H570mm *with 1 Tray
W599×D585×H722mm *with 2 Tray
Footprint 0.35m2
Weight approx. 95kg (209lb) *with 1 Tray
approx. 117kg (258lb) *with 2 Tray
Accessories Power cable, Operation manual, Cutter (for film loading)
The Drypro 832 was first released in 2007, at which time it featured the world's fastest printing time.
Five film sizes and two trays
Five film sizes are available (14×17", 14×14", 11×14", 10×12", and 8×10") optionally, by installing an additional film supply tray, two film sizes can be used at the same time, for example, 14×17" and 11×14", or 14×17" and 8×10"
User-friendly
The DRYPRO 832 is very user friendly. It is easy to use, warms up quickly, and is very quiet. A clearly visible status light changes colour to indicate “Ready”, “Printing”, and “Film Empty” conditions.
User-friendly.
Stable operation with no HDD
Hard drives store system software and data and, with that, there is always a risk that the disc will crash, bringing operation to a standstill. With the DRYPRO 832, we have eliminated the hard drive and introduced a design where the essential system software is run from compact flash memory and image data is managed by an external computer (CS-2/3 or Printlink5-IN), thereby contributing to stable operation.
Networking by Printlink
With its flexible networking capability, the Printlink print management system provides the ideal output solution in a variety of environments, enabling output from multiple Regius consoles (CS-2/3) and printing from DICOM modalities. By using Printlink IV/ID(sold separately), you can also connect to non-DICOM modalities.
Specifications Drypro model 832
Laser source Semiconductor laser
Film size 14”×17” (35×43cm), 14”×14” (35×35cm), 11”×14” (28×35cm), 10”×12” (25×30cm) and 8”×10” (20×25cm) selectable
Film Dry imaging recording film SD-Q / SD-QC
Image format 1,2,4,6,8,9,12,15,16,20,24,25,30,35,36,42,48,54,60,63,64
Image memory Print memory (65MB / standard)
Pixel size 78.6µm (320dpi)
Image data input 8-bit / 12-bit
Output gradation 16384 levels (14-bits)
Image mode Pixel replication / Function interpolation process
Processing capability More than 90 sheets/hour
First printing time Less than 50 seconds
Input interface Ethernet 10base-T/100base-TX/1000base-T
External connection Connection to external computer (CS-2/3 or Printlink5-IN)
Supply 1 Tray (standard) 2 Tray maximum (optional)
Border processing Black/White
Trimmed frame Available
Density correction Automatic via built-in densitometer
Positive/negative Available
Operating condition 15-30℃ (59-86F) 30-70% RH
Power UL:120V AC±10% 60Hz±１Hz 10A
CE:220-240V AC±10% 50-60Hz± 1Hz 6A
Heat generation UL:1200KJ/H or less
CE:1400KJ/H or less
Noise level In print Mode:53 dB or less
In standby mode:46 dB or less
Dimensions W599×D585×H570mm *with 1 Tray
W599×D585×H722mm *with 2 Tray
Footprint 0.35m2
Weight approx. 95kg (209lb) *with 1 Tray
approx. 117kg (258lb) *with 2 Tray
Accessories Power cable, Operation manual, Cutter (for film loading)
