Konica Minolta Drypro 873
SKU:
$10,787.00
$10,787.00
per item
User-friendly low noise design
The excellent design means the unit emits less noise for a user-friendly working environment. The actual noise is turned to the lower tones with little high-frequency tones, making users feel the unit is quieter than the actual noise level. The overall noise, especially noise during the standby run, has been reduced. Even where the standby run is often used as an imager for the filmless era, it can provide a quiet working environment.
Provision of high-quality images
The image interpolation processing (pixel replication/function interpolation) has been enhanced, and intensity conversion processing has been adopted, which automatically recognizes images and letters in the images, executes proper processing, and displays smooth images and sharp letters.
Consistent quality finish
The DRYPRO 873 has an automatic density control function that prints constant exposure density batch onto the film, automatically measures the density with the built-in density meter, and controls the finishing density. Furthermore, the automatic calibration at film exchange enables image printing with consistent image quality.
Specifications Drypro model 873
Laser source Semiconductor laser
Film size Selectable from 14"×17" / 14"×14" / 11"×14" / 10"×12" / 8"×10"
Film to be used Dry image recording films, SD-Q / SD-QC / SD-QM
Image format 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 25, 30, 35, 36, 42, 48, 54, 56, 60, 63, 64
Image memory Compact flash memory (Standard 128MB)
Main memory (256MB)
Print memory (256MB)
Input port Maximum 16 ports
Matrix (14x17)
Regius connection: 8079x9725 pixels (at 43.75µm)
Connection others: 7730x9260 pixels (at 43.75µm)
Matrix size 78.6µm / 43.75µm
Image data input 8-bit, 12-bit
Output grades 16384 grades (14-bit)
Image mode Pixel replication / function interpolation (with intensity conversion process function)
Processing capability 180 sheets/hour (mixed sizes/at ordinary modality)
Input interface Ethernet 1000base-T
DICOM Support DICOM Print Management Service Class, Presentation LUT Service Class …. (For details, refer to DICOM conformance statement)
Supply Two channels standard, maximum and optional third channel
Standby function Transfers to energy-saving mode after pre-set time for none-printing Boot time from the energy-saving mode is less than three minutes
Border processing Black / White
Image trimming frame Possible
Density corection function Built in the body
Negative / Positive Available
Noise level Less than 53db when printing / less than 46db in standby
Footprint 0.35m2
Operation conditions 15°C to 30°C, 30% to 70%RH (condensation)
Power UL : AC 120V±10%; 60Hz±1Hz 10A
CE : AC 220 - 240V±10%; 50/60Hz±1Hz 6A
Dimensions
H1150xW599xD585mm
Weight approximately 152kg
The excellent design means the unit emits less noise for a user-friendly working environment. The actual noise is turned to the lower tones with little high-frequency tones, making users feel the unit is quieter than the actual noise level. The overall noise, especially noise during the standby run, has been reduced. Even where the standby run is often used as an imager for the filmless era, it can provide a quiet working environment.
Provision of high-quality images
The image interpolation processing (pixel replication/function interpolation) has been enhanced, and intensity conversion processing has been adopted, which automatically recognizes images and letters in the images, executes proper processing, and displays smooth images and sharp letters.
Consistent quality finish
The DRYPRO 873 has an automatic density control function that prints constant exposure density batch onto the film, automatically measures the density with the built-in density meter, and controls the finishing density. Furthermore, the automatic calibration at film exchange enables image printing with consistent image quality.
Specifications Drypro model 873
Laser source Semiconductor laser
Film size Selectable from 14"×17" / 14"×14" / 11"×14" / 10"×12" / 8"×10"
Film to be used Dry image recording films, SD-Q / SD-QC / SD-QM
Image format 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 25, 30, 35, 36, 42, 48, 54, 56, 60, 63, 64
Image memory Compact flash memory (Standard 128MB)
Main memory (256MB)
Print memory (256MB)
Input port Maximum 16 ports
Matrix (14x17)
Regius connection: 8079x9725 pixels (at 43.75µm)
Connection others: 7730x9260 pixels (at 43.75µm)
Matrix size 78.6µm / 43.75µm
Image data input 8-bit, 12-bit
Output grades 16384 grades (14-bit)
Image mode Pixel replication / function interpolation (with intensity conversion process function)
Processing capability 180 sheets/hour (mixed sizes/at ordinary modality)
Input interface Ethernet 1000base-T
DICOM Support DICOM Print Management Service Class, Presentation LUT Service Class …. (For details, refer to DICOM conformance statement)
Supply Two channels standard, maximum and optional third channel
Standby function Transfers to energy-saving mode after pre-set time for none-printing Boot time from the energy-saving mode is less than three minutes
Border processing Black / White
Image trimming frame Possible
Density corection function Built in the body
Negative / Positive Available
Noise level Less than 53db when printing / less than 46db in standby
Footprint 0.35m2
Operation conditions 15°C to 30°C, 30% to 70%RH (condensation)
Power UL : AC 120V±10%; 60Hz±1Hz 10A
CE : AC 220 - 240V±10%; 50/60Hz±1Hz 6A
Dimensions
H1150xW599xD585mm
Weight approximately 152kg
